Established over 15 years

Shaded Nation

Shaded Nation – Shade Sails

Five steps to shade sail success

One of the best things about the shade sail canopies we provide here at Shaded Nation is that they are surprisingly easy to install.

One of our pre-made structures can be put up by just two people in a few hours, which saves you both time and money. Follow our five steps to success and you will have your own relaxing shaded spot in no time at all.

1. Planning 
Before you do come close to installing your shade it’s important to do some planning first. A range of things need to be taken into account such as space, the movement of the sun and if you’re planning to attach a shade to a building a professional should be consulted.

2. Installing your fixing points 
Once the plans are sorted, you’ll need to install your fixing points such as posts and brackets. We recommend steel posts for best performance and the one-third in two-thirds out approach normally works a treat when digging holes.

3. Measuring your area
If we’re going to provide you with the perfect shade structure, we’ll need the perfect measurements. Try to note these down as accurately as possible and feel free to get in touch with us if you’re struggling.

4. Order online
So you’ve done your planning, installed your fixing points and carefully taken down your measurements. Now it’s time to order your shade sail! It’s remarkably easy to do so using our online store and you can browse our wide range of shades to find one that suits you.

5. Installation
As mentioned above, installing a shade is a lot easier than you might think and can be done with relatively little effort in a few hours. We won’t go into detail here, but you can find comprehensive instructions about this and the other steps to success by taking a look at our installation guide.

Leave a Reply

Your email address will not be published.

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>