Use a snap hook to clip your shade sail into position.
Used to link a shade sail corner to a pad eye or eye bolt.
Length: 3 inches (76mm) / Guage: 8mm
- Square Shade sails require 4 snap hooks
- Guage: 8mm
- Length: 3 inches (76mm)
- Made of 316 marine grade stainless steel
- Triangular shade sails require 3 snap hooks
Use a snap hook to clip your shade sail into position.!!<
>!!Used to link a shade sail corner to a pad eye or eye bolt.!!<
>!!
Made of 316 Marine Grade Stainless Steel
- Length: 76mm (3 inches)!!<
>!!Guage: 8mm!!<
>!!Material: 316 marine grade stainless steel!!<
>!!
- To ensure adequate tension, allow 300mm gap between the edge of your shade sail and your fixings.
- 316 Marine Grade Stainless Steel will not readily corrode, rust or stain with water as ordinary steel does. It is not fully stain-proof, most notably under low oxygen, high salinity, or poor circulation environments. Stainless steel is used where both the properties of steel and resistance to corrosion are required.
- 316 Marine Grade Stainless Steel will not readily corrode, rust or stain with water as ordinary steel does, but despite the name, it is not fully stain-proof, most notably under low oxygen, high salinity, or poor circulation environments. Stainless steel is used where both the properties of steel and resistance to corrosion are required.