Eye Bolt 8 x 130mm

Ref: SSW008

Allow 300mm gap beween the edge of your shade sail and your fixings to enable adequate tensioning.

£4.37 Ex Vat @ 20%

Next Day Delivery UK

Quantity:

Used to fix into metal or wooden posts to secure your shade sail.

Length: 5 inches (127mm)

Guage: 8mm

Used to fix into metal or wooden posts to secure your shade sail.!!<
>!!

Made of 316 Marine Grade Stainless Steel

Length: 127mm (5 inches)!!<
>!!Guage: 8mm!!<
>!!Material: 316 marine grade stainless steel
To ensure adequate tension, allow 300mm gap between the edge of your shade sail and your fixings.
316 Marine Grade Stainless Steel will not readily corrode, rust or stain with water. This item is not fully stain-proof, most notably under low oxygen, high salinity, or poor circulation environments. Stainless steel is used where both the properties of steel and resistance to corrosion are required.
Regular maintenance is required and recommended that threaded joints are lubricated to prevent galling. Galling may occur where stainless steel parts are forced together, the oxide layour can be compromised causing the parts to cold weld together.
Regular maintenance is required and it is recommended that threaded joints may be lubricated to prevent galling. This scenario may occur where stainless steel parts are forced together, the oxide layour can be scraped off, causing the parts to cold weld together.

Installed Shade Sail Structures